Learning Photo Editing: Advanced Lightroom Tools

I’ve been getting a lot of great feedback on this editing series, so thank you to everyone who has reached out! For the third post in the series, I’m going to talk about a few advanced editing tools in Lightroom that I think every professional photographer should be familiar with. I’m going to explain how to use the HSL panel and split toning.

New to this series? No problem! You can catch up by reading my post on different editing softwares and my tutorial on editing in Lightroom.

Photo Editing Blog Post Series

The HSL Panel

Ah yes, the HSL panel. It looks like some weird rainbow of sliders, but it gives you so much control over the colors in your image. You can use the HSL panel to help you develop a distinctive style or color palette for your images, or use it to refine the skintones of your subjects and get them just right. It’s located on the right side panel in Lightroom, beneath the tone curve.

HSL stands for Hue, Saturation, and Luminance, and all three have their own sub-panels within the HSL tab. You can switch back and forth between the three by clicking on their titles, or click All to have them all displayed at the same time. Lightroom has each slider color coded to give you a sense of how each slider changes an image, but we’ll go panel by panel and I’ll show you what kind of adjustments I make to a test photo using the HSL panel.

The hue section allows you to tweak colors. Lightroom gives you 8 sliders, each of which have a spectrum with two differently colored ends. The yellow slider, for example, is a true yellow in the center, while the left end is more of an orange-yellow. The right extreme is a yellow-green. I make hue adjustments to correct any color skew produced during the course of editing. For example, when I’m photographing clothing for a brand, it’s important that the colors of the clothing are represented accurately to customers. Another great use for it is to produce color tones that help distinguish your photographic style. For example, I alter the greens in a lot of images because I don’t like the bright yellow-green that a lot of plants in Texas show up as in photos. Below, I’ve used the sliders to tweak the yellows and greens towards a yellow-green and green-blue respectively in the image to achieve cooler greens that are less yellow. (Note that all basic adjustments to the image have already been made. You can find a walkthrough of how to make those here.)


The change gives me the cooler greens I want without me having to change the overall white balance of the photo (which would change their skin tones as well). In this photo, I’m able to use the sliders to globally adjust all yellows and greens in the photo. If one of the subjects were wearing yellow or green clothing, however, I would have to use an adjustment brush to brush my hue changes only onto the background, or the colors of their clothing would also change.

You can use the saturation panel to decrease the saturation of any overwhelming or unwanted colors, or pump up any that you want to be more dominant in the photo. Moving a slider left decreases saturation (full desaturation turns a color gray) while moving it right increases saturation. On warmer skin tones, I sometimes bring orange saturation down a little to prevent them from skewing too orange when I increase the temperature of an image. In this test photo, I think the greens are a little overwhelming after the hue adjustment, so I’m going to bring their saturation down a bit so they look less fake. It’s a fairly subtle change, but I think it helps draw the eye more to the couple than all the green.

Webp.net-gifmaker (1).gif

The third sub-panel is luminance. Luminance is easy to confuse with saturation, but instead of ranging from gray to saturated color, each slider goes from the darkest shade of a color the lightest. (Essentially from almost black to almost white.) I use the luminance sliders most often when adjusting skin tones. Above, I mentioned desaturating orange for overly warm skin tones, but too much desaturation can make subjects look gray. So if I feel like the skin still looks too orange, I’ll bump orange luminance up, altering the orange tones to be lighter. In our test image, both subjects have fair, pink-toned skin. His skin (especially his ear and the shadowy area by his mouth) is looking a little ruddy, so I’m going to bump red luminance up. (I’ve zoomed in so you can see it a little better.)

Webp.net-gifmaker (3).gif

My final note on the HSL panel is that for those of you that aren’t a fan of using the sliders, or if you aren’t sure which slider is right for the color you want to adjust, all three HSL sections have a little clickable target at the top left. Once you select it, you can click and hold on any part of your image to choose a color to adjust and then drag your mouse up and down (up correlates to right on the sliders, down is left) to adjust the hue, saturation, or luminance. Your pinpointed selection will tell Lightroom which sliders to change in response.

Split Toning

Split toning is a way to manipulate the colors in isolated tone ranges of an image. You can use it to add certain colors into either the highlights or shadows of an image. This lets you use it to cancel out undesirable tones or add a unique stylistic element to your work. I personally think split toning is such an incredibly powerful tool, and it’s definitely one that every photographer should become familiar with. The split toning panel is just below the HSL panel, and is divided into sliders for highlights and shadows. The hue slider lets you select what color you want to introduce, and then you use saturation to add varying degrees of it into the image.

In the below test image, I’ve already made all my basic and HSL edits, and I’m going to use split toning to stylize the image a little more. I wanted slightly icier highlights because I felt like the overall image was trending orange, so I introduced some aqua/blue into the highlights. To keep from the whole photo from shifting too blue, I added some warmth back into the shadows with yellow. If you focus on the highlights in the image (the  sky, the brighter areas of her face, and the white on her dress) you can see the shift to blue. You can similarly look at shadowy areas to see the difference in the shadows.

Webp.net-gifmaker (4).gif

One of the reasons I think split toning is so powerful is because color tone shifts help visually distinguish your style and can also help you imitate specific styles, such as the color shifts produced by different film stocks. I personally use it mostly on my editorial work, and focus on HSL for any color manipulation on my usual client work, but there are plenty of photographers who use both on a daily basis. (A great example is Ben Sasso, one of my favorite photographers. Read his post on manipulating tones using HSL and split toning here.)

That’s all for this post! I hope learning about these two advanced tools will help you take your editing to the next level! Have something else you want me to discuss in this editing series? Let me know in the comments!

Learning Photo Editing: Basic Adobe Lightroom Tutorial

Welcome back to my editing series! If you haven’t read the first post, check it out for an overview of available editing softwares and a breakdown of where to find things in Lightroom. In this post, I’m going to go over the basic sliders in Lightroom’s Develop module to show you how they work and how to use them for editing.

Photo Editing Blog Post Series

Basic Panel

I think the basic panel is actually sufficient to make the majority of major changes to an image, like tweaking exposure, contrast, and saturation. It’s a great place to focus your attention especially if you’re new to editing. When I edit, this is where I make most of my adjustments. As I walk you through this panel, you can see how each set of sliders makes a difference in my test image.

LRblogbasicpanelFirst up is the white balance dropper in the top left. This is a way to let Lightroom do the heavy lifting on any image where the white balance of an image is pretty far off. All you have to do is click on the dropper and then click on a neutral color in the image. A true black or white (meaning something that you know is definitively black or white in real life) works best, though a neutral gray can also work in a pinch. I think the dropper is best used to correct images with heavily skewed white balance (or at least get them back in the ballpark of correct white balance) but I prefer the sliders most of the time to make adjustments.

To fine tune white balance (or adjust it further if the dropper isn’t getting it quite right), you have the temperature and tint sliders. Lightroom has helpfully color coded them to remind you what each does, but I encourage you to slide them back on forth on a test image to see for yourself. The temp slider is measured in degrees of Kelvin, so a warmer or higher temperature is correlated with a higher number. “Warming an image up” adds more yellow while “cooling an image down” by pulling the slider to the left causes it to take on more of a blue tint. The tint slider plays a similar role but with magenta and green. The original image below is backlit so it’s a little too cool, and the green plants around her reflect some green onto her skin. I’ve warmed it up and added a touch of magenta back in to make her skin look less blue/gray. (You can see the sliders move on the right.)


The next set of sliders are exposure and contrast, which control brightness and contrast (obviously). The exposure slider brightens everything in the photo, as opposed to the highlights, shadows, whites, and blacks sliders, which isolate a portion of tones in the image. Our test image is underexposed, so I’m going to raise exposure and use the contrast slider to add a little extra pop. I like my images bright with a little bit of punch, so I’m raising exposure and contrast significantly.


The next four sliders help you make isolated adjustments to your image. Moving the shadows or blacks sliders to the right makes the darker areas of your image lighter, while moving left makes them darker. I pull my shadows and blacks down when I want to add more contrast without changing my highlights/whites, and raise them when I feel like darker areas of an image are too dark. Raising highlights and whites can add an extra pop of brightness to an image, and I find a little boost in both helps skin look a little more luminous. If something bright in the image is “blown out” (AKA so bright that it has lost detail), dragging highlights or whites to the left can help recover some detail.

In our test image, I wanted to add back some of the depth/richness without the bright areas of the image getting too washed out, so I pulled the blacks down and raised the shadows to prevent it from getting too contrasty. I also brought the highlights down a tad.


The histogram, shown below, has five click-and-draggable sections (blacks, shadows, exposure, highlights, and whites) and can be used in place of these sliders in the basic section. The sliders move in pre-determined increments while the histogram can be freely adjusted, so I generally prefer the histogram. The tone curve plays a similar function, and is another way to adjust contrast and shift the highlights/shadows in a more visual fashion than the sliders. Portions of the curve can be clicked and moved, just like the histogram. I encourage you to play with both along with the sliders to see which method works best for you!

The last three sliders in the basic panel are clarity, vibrance, and saturation. Increasing clarity makes the image sharper and more defined. A tiny boost in clarity can help bring out detail, however I think it’s really easy to go overboard with it, and for the most part, I think images that are in focus that already have their contrast increased don’t particularly need the adjustment.

Vibrance and saturation are both adjustments to the colors in an image. Saturation is a global adjustment, making all colors in the image bolder and brighter. Vibrance plays a similar role, but focuses on the softer colors in the image and doesn’t pump up skintones so much (AKA it won’t make everyone in your photos look like they got a really bad spray tan). I prefer not to touch the saturation slider, but the vibrance slider can lend your images a little boost in color (use it with a light hand).

And that’s your tutorial to the basic panel in Lightroom’s Develop module! Here’s a final before and after of the image, with only the adjustments we made in the basic panel. As you can see, just this one panel can make a pretty big difference if you use it to its full potential!


What do you want to see in the next blog post? Let me know in a comment below, or you can always DM me on Instagram.

Learning Photo Editing: Editing Tools & Lightroom Basics

Editing is one of the the topics that I get the most questions about, so I decided to create this series of blog posts to go over some fundamental topics that I find really important for photographers who are learning to edit. I personally enjoy editing my work, and improving my editing skills helped me take my work to the next level professionally and enabled me to augment my income by editing photos for other photographers.

In this post, I’m discussing my most used editing tools and breaking down some basics in Adobe Lightroom, my primary editing software.

Photo Editing Blog Post Series

(Small disclaimer before we jump in: these posts are designed with the advanced amateur or pre-professional photographer in mind. I’m writing with the expectation that you’re already knowledgeable about camera settings and lighting and use RAW format.)

Editing Software

There are plenty of different options to choose from out there, but I’m an Adobe purist when it comes to editing. I use the Creative Cloud Photography plan, which costs me ~$11/month (including tax) and gives me access to Lightroom CC and Photoshop CC. Lightroom helps me manage and organize large numbers of photos at once (i.e. from shoots or weddings) and has all of the editing capabilities I need on a daily basis. I can make exposure, tone, and color adjustments and have access to tools that can be used for light retouching. I rarely use Photoshop, but I like having it just in case I need to do some more heavy-duty retouching such as removing background objects, etc. Photoshop is an excellent resource for portrait photographers that want to do advanced retouching like skin-smoothing, contouring, or altering. (I choose not to use these techniques on my clients, thus I edit almost exclusively in Lightroom)

If cost is an obstacle, Adobe offers a student discount and also has free trials if you want to test the software before investing in it. There are also free or low cost alternatives to Adobe products if the interface isn’t a good fit for you or you’re looking to save money. GIMP is a free alternative to Photoshop (it’s actually what I used when I first started) and RawTherapee is a free alternative to Lightroom.

Lightroom Anatomy

Since Lightroom is my home base for all things editing, I wanted to break down some of its basic features in this post. (Later posts in this series will go into detail on my most used tools, but if you have a specific question, feel free to leave it for me in the comments!)

Lightroom is organized into different modules that are presented as tabs on the top right of the screen. I spend my time primarily in the Library and Develop modules. The Library module, shown below, lets you view thumbnails of photos and is where you import/export images. It also lets you see an overview of each image: the metadata, histogram, and any keywords or comments you want to add to each image. The slide on the lower right hand side lets you adjust your thumbnail viewing, and the film strip at the bottom and the right and left hand panels can all be collapsed to give you an unhindered view of your images. (The GIF shows what the module looks like with and without all the sidebars collapsed.) I usually leave them in place unless I want to scroll through a shoot and check my images for consistency without anything else taking up screen space.


The Develop module is where the editing action happens. Once you click on Develop, the side panels change to include your editing tools (the film strip on the bottom remains the same to help you navigate between images quickly). Just like in the Library, all the panels are collapsible.


The left panel gives you access to your presets (I’ll discuss these in depth in another post) and if you scroll down, it shows you an image’s editing history so you can step forward and backward among changes. The right panel holds all your editing tools packed into little compartments that you can collapse and expand depending on your needs. (The above image shows the topmost compartment, the basic panel.)

Above the sliders are 6 icons that from left to right that are the crop tool, spot removal tool, red eye correction, graduated filter, radial filter, and adjustment brush. And at the very top is the beloved histogram. (Okay, maybe it’s just beloved to me, but the histogram is my life.) The histogram tells you at a glance how the data in your image is distributed across the blacks, shadows, highlights, and whites (AKA what the exposure is like) and lets you make refined tweaks by dragging each section of the histogram back and forth. I use this all the time to make adjustments to exposure and contrast without scrolling down to find those sliders.

I rarely use the other modules, though the print module can be useful to put together photo collages in Lightroom or format images for printing. I prefer to export my images from Lightroom and do any remaining print prep during or after exporting!

The next blog post in this series will break down in detail the sliders you find in the Develop module along with before and after images, so stay tuned!